Waterproof LED Solar Power Light Sensor Wall Light Outdoor
How your solar powered wall light works?
The solar panel converts sunlight energy into electricity during the day.
The photocell turns the light automaticallyat night with the electricity stored in the batteries.
3. It requires no wiring, because it runs off the sunlight energy to recharge the batteries so there is no cost to run the solar cap.
4. The continue using time are 8 hours in Sunny day.
A. Light control function
1. Light source : LED*2LM
2. Solar plate : poly-silicon 2V/130mA
3. Waterproof : IP55
4. Material : brand-new environment-friendly ABS, PC
5. Charge time : >8H
6. Using time : >8H
7. Accumulator : Ni-MH/AA/1.2V*1000mA
Installation and Operation Instructions
1.Pull up the lamp cover from the middle slot under the lamp cover with a slot type screwdriver.
2.Take out the plastic part in the part bag; hit it into the pre-drilled hole in the wall; lock the product in the wall with screws through the screw
holes in the product with a screwdriver; if the mounting surface is wooden,the plastic part is not necessary.
3.Switch ON the product and reassemble the lamp cover according to the disassembling method.
4.After the installation, the product turns into automatically light-operated mode. In the daytime, it turns off and charges automatically; in the nights, it turns on automatically.
Be sure the solar fixture is in a relatively sunny location.
Make sure the light\'s photocell is not affected by other light.
Tip: Solar Charge can charge quickly under strong sunlight. It may not charge or charge slowly under Periodically clean light fixture with soft cloth and warm soapy water.