Electrical Manicure Pedicure Nail Art Set
Shell Material: Plastic
Size: 13 x 8.5 x 6cm/ 5.1 x 3.3 x 2.3inch (L x W x H)
Voltage: AC 100-240V 60Hz
Plug Type: US Plug
Item: Electric Manicure Pedicure Tool Sets
Collect: 2.35mm (3/32inch)
Rated Speed: 20,000rpm max
Ideal For: Home, Professional Salon
One Sets including: Power Box, Quick-change Handpiece, Handpiece Cradle, Bits and Shaft
This new Electric Nail Art Drill Machine is perfectly used in spas, beauty parlors as well as personal use in homes.
Whether acrylic, glass, or silk wrap artificial nails are being applied, this nail drill with a max speed of 20,000RMA
Can be great help. The ultimate nail machine allows the technician flexibility and can get the job done in much less time and in a much more efficient manner with on/off switch.
Easy to use dialing speed control
Low noise and vibration for smooth and long-time operation
Forward and reverse operation switch
Mechanical collect for security the bit firmly and easy to pull up
Easy bit change using no tools
Suitable for pedicure and manicure
For professional salon or home use
Installation and operation:
1.Insert the hand piece flex plug into power output socket on the main control machine.
2.Select grinding mould of different sizes according to actual requirements, and fasten/secure it into the front of the hand piece.
3.Connect with the main source power.
4.Choose the mode on the main control machine “+” (which means clockwise direction of the hand piece) or “-” 5.(which means counterclockwise direction) and then switch to “On” position.
6.Choose the mode on the hand piece “ON” to start the machine. And choose mode “OFF” for a pause.
7.Select the speed level that you need by sliding the speed control knob.? Please adjust the hand piece to the lowest speed before changing clockwise / counterclockwise direction?
8.After finishing, switch to “OFF” on the hand piece and switch to “OFF” on the main control machine and unplug it.
Note: Always unplug the tool when you change accessory or collect.
1.Do not change the turning direction too frequently; otherwise it will shorten the life of the grinding head.
2.Before changing forward/backward direction or before turn off the machine, please decrease the speed of the grinding head to the minimum.
3.Do not touch the bit after use for the bit is too hot to be touched by bare hands.
4.Keep the machine out of water for it is not waterproof.
5.Keep dust out of eyes and lungs by using protective eyewear or a dust mask.
6.Always unplug it after use. When the machine is not in use, all tools must be stored in a dry location and keep out of reach of children.
7.Any unauthorized disassembling of the product is not suggested in case of any breakdown.
1 x Electric Nail Drill Main control
1 x Hand piece
1 x Handpiece stander
6 x Bits included Mandrel
6 x abrasive sleeves
1 x English Manual