Bicycle Light USB Rechargeable Cycling Electric Horn Bell Handlebar Headlight n800

$76.00
$39.90
You save $36.10 (48% off)
OpenSky savings
48% off MSRP
- $36.10
Please select a quantity.

Please select an option

Bicycle Light USB Rechargeable Cycling Electric Horn Bell Handlebar Headlight

Description:

  • Glare LED main light +2X yellow LED auxiliary light, brightness up to 1000 lumens.

  • Made of high quality ABS, rain, water resistant and lightweight.

  • 5200mAh lithium-ion battery, USB rechargeable available(USB cable is included).

  • Bike light or portable flashlight: The flashlight can be removed from mount. So it??ll work as a handheld torch when you get off from bike.

  • Easy installation without involving any tools. A good partner for safe riding at night, suitable for mountain bike cyclist.

  • Perfect for outdoor sports, such as cycling, camping, traveling, fishing, hiking, hunting, etc.

Specification:

  • Material:ABS

  • Shift: Long press the light switch for 3 seconds to turn on: main light glare - main light weak light - main light flash + 2 auxiliary light glare - 2 auxiliary light glare - long press light on for 3 seconds off

  • Key: Light on key + SET button (+) + MODE button (-)

  • Charging method: micro USB charging

  • Trumpet: 120 decibels.Ringing on button + ringing button to switch whistle - horn sound - alarm sound - dribbing - hum - hum

  • code table data receiver: can be adjusted according to the diameter of the bicycle

  • Display: Km/h: indicates the current riding speed

                     ODO: indicates the total mileage of the ride after the watch is set

                     DST: Indicates the single riding mileage of the last ride after the system is hibernated and restarted.

                     MXS: Indicates the maximum speed of the last ride after the system is hibernated and restarted.

                     AVS: Indicates the average speed of the last ride after the system is hibernated and restarted.

                     TM: indicates the time of the last ride after the system is hibernated and restarted.

    Press the SET button to switch the display ODO-DST-MXS-AVS-TM

  • Data setting: 1. After power-on full display for 2 seconds, the upper part is the current battery level display, and the lower part is the code table unit setting. The default is metric unit (Km/h).

                        2. Press the MODE button once to switch to the English unit.

                        3. Press the MODE button and the SET button simultaneously for 5 seconds, the system enters the soft start, and all the settings are cleared. The system is the same as the new power-on.

                        4. After setting, press the MODE button to determine the speed unit.

                        5. At this time, the default tire circumference is displayed. Press the MODE button. The tire is added once. The unit is cm. The setting range is 10cm-315cm.

                        6. After setting, press SET to enter the initial total mileage setting.

                        7. At this time, there are 5 numbers on the display. The first one is flashing. Press the MODE button and the value will increase.

                        8. After setting the first digit, press the SET button. The second digit flashes. Press the MODE button to increase the value.

                        9. After setting the fifth digit in turn, press SET to exit the initial total mileage setting.

                       10. After setting the tire circumference and total mileage, enter the standby state. At this time, press the MODE button, km/h flashes, the system automatically accelerates the deceleration display.

                       11. The system displays the acceleration symbol (??) during acceleration and the deceleration symbol (??) when decelerating.

                       12. When km/h is not flashing, system acceleration/deceleration does not display symbols.

                       13. After the system enters the standby state, there is no button cargo speed signal within 5 minutes, the system enters the sleep system. When the system is in sleep, the MODE button or the SET button is triggered, and the system enters the standby mode.

Package include:

  • 1 x Bicycle Light

  • 1 x USB Cable

  • 1 x Bracket

Weight (lbs.):0.46
Ships To
Cost
Additional Item
Continental United States
$1.99
$0.99
This product usually ships in 4 business days and should be delivered in 10 business days.
Shop worry free! If you’re not 100% happy with your purchase, you can exchange or return this item within 14 days of receiving it.

Welcome!

PickPerfect.com is being merged in to our OpenSky.com web store. For any customer services inquiries please email our support team directly at [email protected]

Where is my order?

How do I get the status of my order?

You will have received an email letting you know that your order has shipped. It will include the carrier (USPS, UPS, FedEx) and tracking number of your package. The time it takes for a package to ship can vary widely depending on the merchant and type of product. You can email our support team directly at [email protected]

Returns, Refunds, and Cancellations

How do I cancel my order?

You can email our support team directly at [email protected]

How do I return something?

You can return or exchange eligible items up to 14 days from the date your order was delivered as long as products are in resalable condition. Items must be in their original condition (unused, unwashed and undamaged) with all the packaging intact.

My package arrived damaged! What should I do?

You can email our support team directly at [email protected]