This is a EASYGUARD PKE car alarm system with PKE-Passive keyless entry, remote
engine start, push button start stop, which can improve your car safety greatly
once properly installed.
The PKE feature will automatically lock or unlock the door when owner walk away or
approach the car in 1-3 meters with key fob in hand or pocket.
Remote Engine Start can pre-warm or pre-cool your car in cold winter or hot summer
push start stop button can start or stop your vehicle easier and more convenient
and no need to insert the key into the ignition cylinder anymore.
The alarm fits for 95% DC12V petrol cars on the market, include auto gear or
manual andprofessional car alarm installer installation is highly
recommended.

Detailed product description function:
1. PCE (passive keyless entry);
function arm:
After starting the engine, and the remote control in the range of the detector,
get off the car and close the door. After the driver walk away from the car by;
more than 2.5 M-3 M, turning the light flash once, and the siren beeps once, the
car alarm is received in arm mode, and the window closes automatically.
Disarming function:
In arm mode, get close to the machine for 1 M-1.5 M, the turn signal lamp flashes
three times, and the horn does not sound a beep, the system disarm automatically.
2. Arm / block:
Press the lock button, the siren beeps once, the turn signal light flashes once,
the car alarm is received in the hands mode automatically, the LED flash
indicator, the window is closed automatically and the car engine is locked.
3. Disarming / Unlocking:
Press the unlock button, the siren does not sound a beep, the direction indicator
flashes three times, also the door is opened and the system is disarmed.
Attention: if the driver does not open the door and enter the car, the system will
get in hand mode automatically again.
4. remote trunk release:
Press the unlock button for 3 seconds or press the trunk button twice.
5. Remote engine start:
In the hands of the state, press the trunk button 3 times, remote start the car,
the sirens twice, and the direction indicator flashes twice. Attention: after
remote start of the car engine, the car must be in driving mode for 12 minutes.
The car engine will stop and the system will arm mode, if no action is taken
within 12 minutes.
6. Start button:
Sit in the car and close the car doors, also the remote control in the detection
range, step on the brake pedal, and press the engine start button, the engine. In
addition, step on the brake pedal, and press the start button to stop the engine,
turn off the engine.

Important:
We do not provide installation service, and professional car alarm installer
installation is required. Wiring diagram is available for reviewing upon request.
The alarm equip with 2 key fobs, but each time only one fob works while the other
one goes to sleep mode till you activate it(press any button on the key fob will
activate it).
An extra bypass module(like ASIN: B00MEHBVIC) is required if there is a chip
immobilizer in your factory OEM key fob.
If there is steering lock in your car, you need to release the steering lock first
before installing this item.
If your car is diesel car which engine starting time over 3 seconds, you need to
install an extra timer delay. If you are not sure which type of timer delay,
please ask professional installer or our staff for help.

Main unit system:
Operation Voltage: DC12V 3V;
Static current: 15mA(except indicator,sensor);
PKE emission Curent:40mA;
Shock Sensor Curent: 1mA;
Coding: Ieaning code;
Frequency:433.92MHZ;
125KHZ;
Starting System:
Operation Voitage:DC12V 3V;
ACC Current: 30A;
ON Current: 30A;
Start Current:30A;

Remote Control:
Operation Voltage:DC3V;
Operation current: 8mA;
Static Current:8uA;
Coding:Ieaning code;
Batter:CR2032;
Frequency:433.92MHZ;
125KHZ;

Specifications:
Package size: 24167.5/9.446.292.95in;
Package weight:754g/26.6oz;

Package list:
Control module x1;
Key fob x2;
PKE antenna x2;
Wire hareness x2;
Push start button x1;
LED Siren x1;
Shock sensor x1;
English user manual and wire diagram x1